server to server transfer

Locked
adnedarn
Posts: 2
Joined: Wed Jun 08, 2011 7:53 pm

server to server transfer

Post by adnedarn » Wed Jun 08, 2011 7:56 pm

I have read that server to server transfer should work, and I'm doing it as shown in the tutorial... but all it does is showes server to server and keeps giving a retry time. I have contacted the host to my 2 dedicated servers (1and1) and they confirmed that "We do not block any form of traffic between your Servers." when I asked if FXP was available. Any suggestions?
Thanks!
Andrew

Guess I should add, I connected directly to my modem and shut down my firewall just to be sure these things were not causing a problem and it did not help.
Last edited by adnedarn on Wed Jun 08, 2011 8:00 pm, edited 1 time in total.

mb
Posts: 12029
Joined: Thu Oct 11, 2001 1:24 pm
Display name: Mat (SmartFTP)
Contact:

Re: server to server transfer

Post by mb » Wed Jun 08, 2011 8:05 pm

Most likely FXP is disabled in the FTP server configuration.

adnedarn
Posts: 2
Joined: Wed Jun 08, 2011 7:53 pm

Re: server to server transfer

Post by adnedarn » Wed Jun 08, 2011 8:09 pm

Within SmartFTP? Where is that setting?

Or on my servers? I already confirmed with them that FXP is allowed as stated in original post.
Thanks!
Andrew

mb
Posts: 12029
Joined: Thu Oct 11, 2001 1:24 pm
Display name: Mat (SmartFTP)
Contact:

Re: server to server transfer

Post by mb » Wed Jun 08, 2011 8:13 pm

In the configuration of your FTP server.

Locked